22 Eos Family v2.9.0 Operations Manual
Command Line Search
Command line search allows you to search your recorded targets, effects, and channels. The
search window will display the object, it's number, and any label you have given it.
Press the Search icon at the end of the command line or use [Shift] & [About] to open the
command line search window.
Parameter Display
This display shows the parameters available for patched channels. It is also where you can select
which parameters to view in the Live and/or Blind displays, or select parameters for command
line control. The parameter display will dynamically change depending on the channel (fixture)
selected and its applicable parameters.
For more information on using the parameter display, see
Using the Parameter Display (on
page155)
.
Parameter Category Button Labels
These labels correspond to the buttons directly beneath the Parameter display. They indicate the
six buttons; Intensity, Focus, Color, and the three Beam categories (Form, Image, and Shutter).
Collapsing the Parameter Display
The parameter display can be collapsed when working with some displays that use the CIA, such
as About and Query. A collapse/ expand arrow will display in the last column where this option
is available.
When collapsed, only the {All NPs}, {All Speed}, and {Expand Arrow} buttons will be displayed.
Labeling
[Label] is used to attach an alphanumeric label to an object such as cues, channels, submasters,
etc.
To Next Page
Loading...
