392 Eos Family v2.9.0 Operations Manual
To assign a partition to a cue list:
[Cue] [n] [/] {Partition} [n] [Enter]
To remove a partition from a cue list:
[Cue] [n] [/] {Partition} [Enter]
Flexichannel in Partitioned Control
When partitioning is enabled, a flexi mode, “Partitioned” is available as a softkey. When this is
enabled, the flexi mode is limited to only those channels defined in the current partition. This
mode may be further modified by use of the remaining flexi states. See
Using Flexichannel (on
page47)
and
Flexichannel Views in Patch (on page88)
for more information.
To Next Page
Loading...
