ETC Element - Editing Snapshots

328 Eos Family v2.9.0 Operations Manual
•
the channels that use the curve as a fan curve
•
the cues/cue parts that use the curve
[About] Effects
When an effect is selected, the following information will be displayed:
Note: To view About Effect in live, the effect must be running.
•
effect number
•
effect label (if any)
•
list of submasters that use the effect
•
list of cues that use the effect
Note: Any cues or submasters that have overrides, such as rate, for the effect will
display an *.
[About] Groups
When a group is selected, the following information will be displayed:
•
group number
•
the group label (if any)
•
the channels in the group
The {Ordered} and {Numerical} softkeys can be used to change the display view in About
Groups.
[About] Submaster
The following information will be displayed when a submaster is selected:
•
The submaster number
•
Label (if any)
•
Current value
•
Mode (additive, inhibitive, or effectsub)
•
Fader (proportional or intensity master)
•
HTP or LTP
•
Exclusive
•
Priority
•
Timing
•
Fader Pages
•
Channels in Submaster
•
Effects assigned
[About] Macro
[About] Macro display shows a list of cues that will execute a selected macro. To view this
display, you must be in the Macro Editor Display. While in that display, press [About] and then
select the macro by using a mouse or touchscreen.
[About] IFCB Palettes
The following information will be displayed when an intensity, focus, color, or beam palette is
selected: