Using About 323
Software Version
Rack Errors
Note: Clearing CEM+ / CEM3 errors from Element will be temporary unless the errors
have been fixed at the CEM+ / CEM3. Errors displayed on Element will clear on their
own once they have been cleared from the CEM+ / CEM3. Some CEM+ / CEM3 errors
can only be cleared at the CEM+ / CEM3.
Clicking on a FDX rack in the {About System} list will open the About Rack display, which shows
the following information about the rack:
Rack number
Rack Type
Phase A,B,C Voltages
Frequency
System Number
IP Address
Software Version
Buttons available in the About Rack screen are {Activ. Preset}, {Deactiv. Preset}, and {Clear
Errors}.
[About] Channel
Press [About] to put the CIA into About mode. When a channel is selected, the information
below is displayed. You can select the information you wish to view from the buttons located on
the right side of the CIA. The buttons are:
{Current Value} displays information that indicates:
Channel number
Device Type
Most recent intensity move (cue number)
Next intensity move
What the channel is inhibited by (if anything)
Keywords
Notes
A list of all parameters on the channel showing the current value and its source, the DMX
value, the absolute value, delay and timing information, marking information, and any
parked values.
{Background} displays similar information:
Channel number
Device Type
Keywords
Notes
A list of all parameters on the channel showing the background value and its source,
which shows what the parameters will go to if the current control source is removed. The
background data will be represented by the standard color coding scheme.
{Moves} displays information that shows:
Parameters
Previous move in the cue list that currently has ownership
Value of the previous move (preset, palette, or absolute data)
To Next Page
Loading...
