ETC Element - Applying a Curve To Channels In Patch

322 Eos Family v2.9.0 Operations Manual
Note: Only one instance of the documentation can be open at a time.
Note: For consoles running Windows XP or Macs running ETCnomad, the manual is
not available for viewing. Please see ETC's website, etcconnect.com, to view the
online manual or download a PDFversion.
[About] System
When {About System} is pressed, the CIA displays a list of all network devices that are
connected to Element. These network devices include:
•
Consoles
•
Net3 RVI and RVI3
•
ETCnomad and ETCnomad Puck
•
Net3 Show Control Gateways
•
Net3 I/O Gateways
•
Legacy Unison CMEi processors
•
Unison Paradigm processors
•
CEM+, CEM3, FDX 2000/ 3000
•
Net3 Gateways
•
ETCNet2 Nodes
Each network device will display the following information:
•
Device Type
•
Name/Component
•
Status
•
Connected
•
IP Address
Note: Devices may appear more than once in this list if they have multiple roles on
the network.
Note: If any errors or warnings are present at the rack, the CEM+ / CEM3 will display
in red.
Clicking on a CEM+ / CEM3 in the {About System} list will open the About Rack display, which
shows the following information about the rack:
•
Rack Name (displays as the title)
•
Type
•
Ambient Temperature
•
Phase A,B,C Voltages
•
Frequency
•
System Number
•
IP Address