460 Eos Family v2.9.0 Operations Manual
If you have multiple devices sending or receiving strings, separate each entry in the {String TX IP
Address} field with a comma.
Note: The console can be configured to send either ACN strings or UDP strings, as
they share the String Tx IP Address field. A combination of device names for ACN and
IP addresses for UDP is not supported.
Sending via the I/O Gateway
For your console to send serial data to a Net3 I/O Gateway, the Serial Port Group ID assigned at
the gateway must match the String TX Group ID in Setup, and String TX setting in Setup must be
Enabled. See
Show Control Settings
.
To Next Page
Loading...
