ETC Element - Page 479

Show Control 467
•
<Event> [2] [Macro] [2] [Enter]
Creating a Program Change Event
Create a new event and open the MIDI String configuration screen
•
<Event> [3] [More SK] {MIDI String}
Select the {Program Change} type
•
{Program Change}
Select the MIDI channel
•
<Channel> {7}
Select the program number
•
<Program Number> {3}{2}
Press {OK} to save the event
•
{OK}
Specify the action for the event
•
<Event> [3] [Cue] [1][0] [Enter]
Creating a Control Change Event
Create a new event and open the MIDI String configuration screen
•
<Event> [4] [More SK] {MIDI String}
Select the {Control Change} type
•
{Control Change}
Select the MIDI channel
•
<Channel> {7}
Select the controller number
•
<Controller Number> {6}{4}
Specify the data value
•
<Data> {1}{2}{7}
Press {OK} to save the event
•
{OK}
Specify the action for the event
•
<Event> [4] [Sub] [1] {On} [Enter]
Sending MIDI
MIDI messages can be sent from cues and subs (using {Execute}) or from a Macro.
Cues and Submasters
After selecting a cue and pushing {Execute}, the {MIDI Raw} softkey becomes available. Notes
can either be input using hexadecimal values (00 through FF) or decimal (0 through 255) values
depending on the connected device. The console will default to hexadecimal format. To use
decimal format, begin the MIDI string with “D” (Dfollowed by a space).