498 Eos Family v2.9.0 Operations Manual
Eos will reply with the same command as if the detailed information were requested via index as
shown in Step 2.
Integrating Your App with Eos: Step 4 – Modifying Eos Show
Data
You can modify Eos show data.Typically you should build Eos command lines and send them
with the command /eos/cmd or /eos/newcmd.
However, you can use the following convenience commands for editing the most common show
data attributes:
/eos/set/patch/<channel number>/label = <string: text> (include part number in the path
when necessary)
/eos/set/patch/<channel number>/text1 = <string: text>
/eos/set/patch/<channel number>/text2 = <string: text>
/eos/set/patch/<channel number>/text3 = <string: text>
/eos/set/patch/<channel number>/text4 = <string: text>
/eos/set/patch/<channel number>/text5 = <string: text>
/eos/set/patch/<channel number>/text6 = <string: text>
/eos/set/patch/<channel number>/text7 = <string: text>
/eos/set/patch/<channel number>/text8 = <string: text>
/eos/set/patch/<channel number>/text9 = <string: text>
/eos/set/patch/<channel number>/text10 = <string: text>
/eos/set/patch/<channel number>/notes = <string: text>
/eos/set/patch/<channel number>/gel = <string: text>
/eos/set/cuelist/<cue list number>/label = <string: text>
/eos/set/cue/<cue list number>/<cue number>/label = <string: text> (base data)
/eos/set/cue/<cue list number>/<cue number>/<cue part number>/label = <string: text>
(part data)
/eos/set/group/<group number>/label = <string: text>
/eos/set/macro/<macro number>/label = <string: text>
/eos/set/sub/<sub number>/label = <string: text>
/eos/set/preset/<preset number>/label = <string: text>
/eos/set/ip/<ip number>/label = <string: text>
/eos/set/fp/<fp number>/label = <string: text>
/eos/set/cp/<cp number>/label = <string: text>
/eos/set/bp/<bp number>/label = <string: text>
/eos/set/curve/<curve number>/label = <string: text>
/eos/set/fx/<fx number>/label = <string: text>
/eos/set/snap/<snap number>/label = <string: text>
/eos/set/pixmap/<pixmap number>/label = <string: text>
/eos/set/ms/<ms number>/label = <string: text>
Detailed Information Packet Contents
Note: < index> is only valid when detailed information is requested via /index (for
performance reasons)
PATCH (1 OF 2):
/eos/out/get/patch/<channel number>/<part number>/list/<list index>/<list count> =
<uint32: index>