FortiGate Version 3.0 MR4 Administration Guide
164 01-30004-0203-20070102
FortiGuard Center System Maintenance
AntiVirus and IPS Downloads
Select the blue arrow next to AntiVirus and IPS Downloads to access this section.
Figure 90: AntiVirus and IPS Downloads section
[Update] Select to manually update this service on your FortiGate unit.
This will prompt you to download the update file from your local
computer. To download updates from FDN directly, use the
Update Now control.
(Date) Local system date when the FortiGate unit last checked for
updates for this service.
AntiVirus and IPS
Downloads
Select the blue arrow to display or hide this section. See
“AntiVirus and IPS Downloads” on page 164.
Web Filtering and
AntiSpam Options
Select the blue arrow to display or hide this section. See “Web
Filtering and AntiSpam Options” on page 165.
Log & Analysis
Options
Select the blue arrow to display or hide this section. See “Log &
Analysis Options” on page 166.
If you are not connected to a FortiGuard FortiAnalyzer unit, there
will be no content in this section.
IPS Options Select the blue arrow to display or hide this section.
Select to send attack details to FSN to improve IPS signature
quality.
Fortinet recommends that you enable this feature.
Use override
server address
Select to configure an override server if you cannot connect to the FDN
or if your organization provides updates using their own FortiGuard
server.
When selected, enter the IP address or domain name of a FortiGuard
server and select Apply. If the FDN Status still indicates no connection
to the FDN, see “Troubleshooting FDN connectivity” on page 166.
Allow Push
Update
Select to allow push updates.
Push Update Status Icon shows the status of the push update service.
Push Update
Status Icon
The status of the FortiGate unit for receiving push updates:
• grey - unreachable - FortiGate unit is not able to connect to push
update service
• yellow - not available - push update service is not available with
current support license
• green - available - push update service is allowed. See “To enable
push updates” on page 168.
If the icon is either grey or yellow, see “Troubleshooting FDN
connectivity” on page 166.
Use override
push
Select to enable custom IP address and port to be used to connect to
the push update server.
Available only if Allow Push Update is selected.