Output Format
105
Copy
3
îš„Starting & Ending Page Numbers
Allows you to specify the start and end pages to add page numbers, in the range of 1
to 999.
Note • Use [ ] and [ ], or the numeric keypad and enter the start and end page numbers.
îš„Include Covers/Separators
Available when [All Pages] is selected. Place a check mark to include covers and
separators.
îš„Starting Number
You can enter a value within the range from 1 to 999.
Note • Use [ ] and [ ], or the numeric keypad and enter a starting page number.
[Bates Stamp] Screen
This screen allows you to select prefix text and to specify the number of digits to be
used for page numbers.
1
Select any item.
îš„Off
Adds no prefix text or page number.
îš„Bates Stamp
Adds prefix text and page numbers to copies.
îš„Stored Prefixes
Allows you to use the screen keyboard to enter prefix text up to 16 characters.
îš„Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can specify the number of digits to be used for page numbers, between 1 and 9
digits in 1 digit increments.
îš„Apply To
Displays the [Apply Bates Stamping To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.106).
îš„Position
Displays the [Bates Stamping - Position] screen.
You can select a prefix and page-number position from six options.
You can also select a stamp position on Side 2 from [Same as Side 1] or [Opposite to
Side 1].
To Next Page
Loading...
Need help?
General
