3 Copy
106
Copy
3
îš„Font Size
Displays the [Bates Stamping - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range of 6 to 24 points in 1 point increments.
[Apply Bates Stamp To] Screen
This screen allows you to specify a page range to add prefix text and page numbers.
1
Select any item.
îš„All Pages
Adds prefix text and page numbers to all pages.
îš„Starting Page Number
Allows you to specify the start page to add prefix text and a page number, in the range
of 1 to 999.
Note • Use [ ] and [ ], or the numeric keypad and enter the start page number.
îš„Ending Page Number
Allows you to specify the end page to add prefix text and a page number, in the range
of 1 to 999. The start page is fixed to "1".
Note • Use [ ] and [ ], or the numeric keypad and enter the end page number.
îš„Starting & Ending Page Numbers
Allows you to specify the start and end pages to add prefix text and page numbers, in
the range of 1 to 999.
Note • Use [ ] and [ ], or the numeric keypad and enter the start and end page numbers.
îš„Include Covers/Separators
Available when [All Pages] is selected. To also include covers and separators, place a
check mark.
îš„Starting Number
You can enter a value within the range from 1 to 999999999 when [Number of Digits]
is not set, and can enter a value of up to the specified number of digits when [Number
of Digits] is set.
Important • If the page number exceeds the specified value (1 to 999999999 when [Number of
Digits] is not set) during copying, the copy job will be canceled.
Note • Use [ ] and [ ], or the numeric keypad and enter the end page number.
To Next Page
Loading...
Need help?
General
