3 Copy
108
Copy
3
îš„Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
z
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this item when placing the top edge of the document against the left side of
the document glass or document feeder.
îš„Watermark Effect
Displays the [Watermark Effect] screen.
Refer to "[Watermark Effect] Screen" (P.108).
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
[Stored Watermarks] Screen
Select the text to print on the copy.
1
Select [On].
2
Select any text.
îš„Off
No text is printed.
îš„On
Text is printed. You can select the text used for watermark. You can specify text from
3 preset texts or the text set in the System Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark"
> "Custom Watermark 1 to 3" in the Administrator Guide.
[Watermark Effect] Screen
You can set Text Effect on this screen.
If you enable the Text Effect feature, the text strings specified in [Control Number],
[Text], [User Account Number], [Date & Time], and [Serial Number] on the [Watermark]
screen are embedded in the background of each copy. When the copy is copied again,
the text embedded in the background is printed as embossed or outline text depending
on the option you select on the [Watermark - Text Effect] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
To Next Page
Loading...
Need help?
General
