Printing and Deleting Stored Documents
295
Job Status
11
Note • When you have selected [Save in Private Charge Print] or [Save in Charge Print] for
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Delayed
Print] under [Secure Print Jobs & More] even if you select [Delayed Print] on the print driver.
For more information, refer to "5 Tools" > "Authentication/Security Settings" >
"Authentication" > "Charge/Private Print Settings" in the Administrator Guide.
1
Select [Delayed Print].
2
Select the document to be printed or
deleted.
Note • Select [Refresh] to display the updated
information.
• Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• [Print Time] shows the time to start
printing.
3
When printing, specify the number of print
using the numeric keypad.
4
Select any item.
Delete
Deletes the selected document.
Refer to "When [Delete] is Selected" (P.295).
Print
Prints the selected document. After printing, deletes the document. If printed manually,
the document will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.296).
When [Delete] is Selected
1
Select [Delete].
Delete
Deletes the document.
Important • Once the document is deleted, it cannot
be restored.
Cancel
Cancels deleting the document.
To Next Page
Loading...
