Output Format
93
Copy
3
• If [Auto Paper Select] is set for [Paper Supply], a tray specified in [Auto Paper Off] is
automatically selected. Change the settings if necessary. For information on [Auto Paper
Off], refer to "5 Tools" > "Copy Service Settings" > "Copy Control" in the Administrator
Guide.
1
Select [Booklet Creation].
2
Select any item.
îš„Off
Disables this feature.
îš„Create Left/Top Bound Booklet
Copies are made to enable left binding or top binding.
îš„Create Right Bound Booklet
Copies are made to enable right binding.
îš„Copy Booklet
You can output the copies of scanned documents as they are by specifying Bi-fold/
Stapling. Select this when you do not need a document to be copied in booklet page
order.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Covers
You can attach covers to a booklet.
z
No Covers
No cover is added.
z
Blank Covers
A blank sheet of paper is attached as the cover.
z
2 Sided Covers
The first and second pages of the document are copied on both sides of the cover.
z
1 Sided Covers - Print Outside
The first page of the document is copied on the front side of the cover.
îš„Last Page on Back Cover
Selecting this check box copies the image of the last document page onto the last page
of the copy sheets as a back cover. When you use [Divide Output] to divide a booklet
into subsets, the image of the last document page will be copied onto the last page of
the last subset.
Note • Depending on the number of pages in the original, a blank page may be added before the
last booklet page.
îš„Binding Shift
Displays the [Booklet Creation-Binding Shift] screen.
To Next Page
Loading...
Need help?
General
