3 Copy
94
Copy
3
Refer to "[Booklet Creation-Binding Shift] Screen" (P.94).
îš„Divide Output
Displays the [Booklet Creation-Divide Output] screen.
Refer to "[Booklet Creation-Divide Output] Screen" (P.94).
îš„Fold & Staple
Displays the [Booklet Creation - Fold & Staple Options] screen.
Refer to "[Booklet Creation-Fold & Staple] Screen" (P.95).
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover
pages from [Cover Tray]. The orientation and size of paper loaded in the trays must be
the same.
When [Bypass...] is selected, the [Tray 5] screen appears. For more information, refer to "[Tray 5]
Screen" (P.68).
[Booklet Creation-Binding Shift] Screen
You can set the binding shift value within the range from 0 to 50 mm in 1 mm
increments.
1
Use [ ] and [ ] or numeric keypad to
specify a binding shift value.
[Booklet Creation-Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets
to reduce the thickness of each booklet. The machine folds copies in half, and piles
them up to form a booklet. You can specify the number of sheets within the range of 1
- 50 in 1-sheet increments.
Note • When specifying [Folding], set the dividing number of sheets in the range from 1 to 15.
1
Select [On].
2
Set the number of copies using [ ] and [ ]
or with the numeric keypad.
To Next Page
Loading...
Need help?
General
