9 Tools
162
Tools
9
Purpose:
To disable 802.1x authentication. The change becomes effective after the machine is
turned off and then on again.
Values:
Reset Network Setup
Purpose:
To initialize network data stored in non-volatile memory (NVM). After executing this
function and rebooting the machine, all network settings are reset to their default values.
Values:
Delete All Certificates
Purpose:
To delete all certificates.
Fax Settings
Use the Fax Settings menu to configure the basic fax settings.
Note • Bold values are the factory default menu settings.
Fax Line Settings
Purpose:
To configure basic settings for the fax line.
z
Fax Number
Purpose:
To set the fax number of the machine, which will be printed on the header of a fax
message.
z
Region
Purpose:
To select the region where the machine is used.
Values:
Disable Disables 802.1x.
Reset Initializes the network data stored in NVM.
Unknown
Australia
China
Hong Kong
Indonesia
Malaysia
New Zealand
Philippines
Singapore
South Korea
To Next Page
Loading...
