9 Tools
168
Tools
9
Values:
Transmission Defaults
Purpose:
To configure settings for transmitting fax.
z
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
z
Dial Type
Purpose:
To select the dialing type.
Values:
z
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
Off Prints excess images or text at the bottom of a fax page without
discarding it.
On Discards any excess images or text.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate
paper size.
Number of Redial 3 Sets the number of redial attempts to make
when the destination fax number is busy. If
you enter 0, the machine will not redial. The
value is set in increments of 1.
0-9
Redial Interval 1 Sets the interval between redial attempts.
The value is set in increments of 1 minute.
1-15
Interval Timer 8 Sets the interval between re-send attempts.
The value is set in increments of 1 second.
3-255
PB Uses tone dialing.
DP (10PPS) Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
DP (20PPS) Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.
Off - Does not set a prefix dial number.
On - Sets a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits.
This number dials before any auto dial
number is started. It is useful for accessing
the Private Automatic Branch Exchange
(PABX).
To Next Page
Loading...
