Fuji Xerox DocuCentre SC2020

9 Tools
170
Tools
9
 Fax Reports
Purpose:
To configure settings for fax reports.
z
Fax Activity
Purpose:
To set whether to automatically print a Fax Activity Report after every 50 incoming and
outgoing fax communications.
Values:
z
Fax Transmit
Purpose:
To set whether to print a transmission result after a fax transmission.
Values:
z
Fax Broadcast
Purpose:
To set whether to print a transmission result after a fax transmission to multiple
destinations.
Values:
z
Fax Protocol
Purpose:
To set whether to print the protocol monitor report, which helps you identify the cause of
a communication problem.
Values:
System Settings
Use [System Settings] to configure a variety of machine features.
Auto Print Automatically prints a Fax Activity Report after every 50 incoming
and outgoing fax communications.
No Auto Print Does not automatically print a Fax Activity Report after every 50
incoming and outgoing fax communications.
Print Always Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Print Always Prints a broadcast report after every fax broadcast.
Print On Error Prints a broadcast report only when an error occurs.
Print Disable Does not print a broadcast report after a fax broadcast to multiple
destinations.
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints the protocol monitor report only when an error occurs.
Print Disable Does not print the protocol monitor report.