9 Tools
176
Tools
9
Values:
Output Settings
Purpose:
To configure settings concerning output from the machine.
z
Default Paper Size
Purpose:
To specify the default paper size.
Values:
* : The default for [Default Paper Size] varies depending on region-specific factory default.
z
Print ID
Purpose:
To specify a location where the user ID is printed.
Values:
Note • When you print on DL size paper, a part of the user ID may not be printed correctly.
z
Print Text
Purpose:
To specify whether the machine outputs PDL data, which is not supported by the
machine, as text when the machine receives it. Text data is printed on A4 or Letter size
paper.
Values:
z
Banner Sheet
Note • Banner Sheet feature is available only when the One Tray Module (optional) is installed on the
machine.
Purpose:
Off Disables the fault time-out.
On 60 sec Sets the amount of time the machine waits
before canceling a job that stops abnormally.
3-300 sec
A4
*
8.5 x 11
*
Off Does not print the user ID.
Top Left Prints the user ID on the top left of the page.
Top Right Prints the user ID on the top right of the page.
Bottom Left Prints the user ID on the bottom left of the page.
Bottom Right Prints the user ID on the bottom right of the page.
Off Does not print the received data.
On Prints the received data as text data.
To Next Page
Loading...
