Understanding the Machine Menus
177
Tools
9
To specify the position of banner sheet, and also specify the tray in which the banner
sheet is loaded.
Values:
z
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Values:
z
Letterhead 2 Sided
Purpose:
To specify whether to print on both sides when using letterhead.
Values:
z
Report 2 Sided Print
Purpose:
To specify whether to print reports on both sides of a sheet of paper.
Values:
z
Copy Auditron
Purpose:
To specify whether to limit the copy functions that can be used per user by Auditron
authentication.
Insert Position Off Does not print the banner sheet.
Front Inserted before the first page of every copy.
Back Inserted after the last page of every copy.
Front & Back Inserted before the first page of every copy
and after the last page of every copy.
Specify Tray Tray5 (Bypass) The banner sheet is loaded in the Tray 5
(bypass).
Tray1 The banner sheet is loaded in Tray 1.
Tray2 The banner sheet is loaded in Tray 2.
Off No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger
paper size, the machine substitutes paper of nearest size.
Nearest Size Substitutes paper of nearest size.
Use Tray5 (Bypass) Substitutes paper from Tray5 (Bypass).
Disable Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
1 Sided Prints reports on one side of a sheet of paper.
2 Sided Prints reports on both side of a sheet of paper.
To Next Page
Loading...
