9 Tools
178
Tools
9
Values:
z
Print Auditron
Purpose:
To specify whether to limit the print functions that can be used per user by Auditron
authentication.
Values:
z
No Account User Print
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
z
Auto Color To Mono Print
Purpose:
To specify whether to automatically change the color of the print jobs requested to be
printed in color into black and white.
Values:
z
Calibration
Purpose:
To automatically calibrate colors when the reproducibility of density or color in copies and
prints deteriorates.
Follow the instructions on the screen to calibrate the colors for copy and print jobs.
Note • For copy jobs, when [Output Color] is set to [Black & White], calibration is not applied.
• During auto calibration, the machine cannot receive print jobs, send and receive faxes, or send and
receive data via the network. Also, the machine cannot enter the Power Saver mode.
• For [Calibration Target], select from [Copy/Print], [Copy], [Print], and [None]. When [Copy/Print] is
not selected for [Calibration Target], calibration is not valid for the mode not listed in [Calibration
Target].
• If color is not calibrated despite the periodic execution of auto calibration, contact our Customer
Support Center.
Maintenance
Use the [Maintenance] menu to initialize the NV (non-volatile) memory, configure the plain
paper quality adjustment settings, and configure the security settings.
Off Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off Does not permit non-account user to print the data.
On Permits non-account user to print the data.
Off Prints color print jobs as requested.
On Prints color print jobs in black and white.
To Next Page
Loading...
