Understanding the Machine Menus
179
Tools
9
Note • Bold values are the factory default menu settings.
îš„ Adjust Paper Type
Purpose:
To specify paper density settings.
Values:
îš„ Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the
previous page, or a part of the page currently printing.)
Values:
îš„ Adjust 2nd BTR
Purpose:
To specify the transfer roll voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on
the print output, try to increase the voltage. If you see white spots on the print output, try
to decrease the voltage.
Note • The print quality changes depending on the setting values you select for this item.
Values:
Plain Lightweight
Heavyweight
Labels Lightweight
Heavyweight
0 If faint ghosts appear, try to decrease the value.
(Lighten) -5 to +5 (Darken)
Plain (60-89 gsm) 0
-5 to +10
Bond (90-105 gsm) 0
-5 to +10
Recycled (60-105 gsm) 0
-5 to +10
Heavyweight (HW)
(106-169 gsm)
0
-5 to +10
Extra Heavyweight
(170-256 gsm)
0
-5 to +10
Gloss (106-169 gsm) 0
-5 to +10
Heavyweight Gloss
(170-256 gsm)
0
-5 to +10
Labels (106-256 gsm) 0
-5 to +10
To Next Page
Loading...
Need help?
General
