9 Tools
180
Tools
9
îš„ Adjust Alignment
Purpose:
To adjust the alignment of the printed image.
Values:
* : [Tray 2] is available only when the One Tray Module (optional) is installed.
îš„ Auto Registration
Purpose:
To perform color registration adjustment.
îš„ Quick Density Adjust
Purpose:
To perform quick density adjustment.
îš„ Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory for system parameters, Address Book data for
fax, or Address Book data for scan. After executing this function and rebooting the machine,
the menu parameters or data, except the parameters for the network, are reset to their
factory default values.
Postcard 0
-5 to +10
Envelope 0
-5 to +10
Adjust Lead/Side Regi Tray 5
(Bypass)
Lead Regi (X) 0.0 mm
-2.0 to 2.0 mm
Side Regi (Y) 0.0 mm
-2.0 to 2.0 mm
Tray 1 Lead Regi (X) 0.0 mm
-2.0 to 2.0 mm
Side Regi (Y) 0.0 mm
-2.0 to 2.0 mm
Tray 2
*
Lead Regi (X) 0.0 mm
-2.0 to 2.0 mm
Side Regi (Y) 0.0 mm
-2.0 to 2.0 mm
Duplex Module Lead Regi (X) 0.0 mm
-2.0 to 2.0 mm
Side Regi (Y) 0.0 mm
-2.0 to 2.0 mm
Adjust Squareness Squareness 0.0 mm
-1.0 to 1.0 mm
To Next Page
Loading...
Need help?
General
