Fuji Xerox DocuCentre SC2020 User Manual

Error Code
271
Problem Solving
13
031-588 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the storage location has free space.
031-590 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Set other than "Cancel" for processing in the case of file name
duplication, or rename/delete the file whose name is the same as the one
specified in the sending destination folder.
031-594
031-595
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Try the same operation again. Contact our Customer Support Center
if this failure is repeated.
031-598 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the append access right to the file and if the server supports
the FTP append command.
031-599 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the rename access right to the file. Check if the server supports
the FTP rename command.
033-500
033-501
033-502
033-503
033-510
033-511
033-512
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
033-513 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Try the following:
z
Print the received fax, or wait for a while until the fax is sent.
z
Print the fax job stored using the Secure Receive feature.
For more information on the Secure Receive feature, refer to "Secure Receive" (P.166).
033-514
033-515
033-516
033-517
033-518
033-519
033-520
033-521
033-522
033-523
033-524
033-525
033-526
033-573
033-751
033-752
033-753
033-754
033-755
033-756
033-757
033-758
033-759
033-760
033-761
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
Error Code Remedy

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English