Error Code
273
Problem Solving
13
035-702
035-704
035-705
035-706
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
035-708 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Try the following:
z
Retry the same operation.
z
Reduce the modem speed.
For more information on the modem speed, refer to "Modem Speed" (P.169).
035-709
035-710
035-716
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
035-717 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Reduce the modem speed.
For more information on the modem speed, refer to "Modem Speed" (P.169).
035-718 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the status of the remote machine.
035-720 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the features supported by the remote machine.
035-728
035-729
035-730
035-737
035-739
035-740
035-742
035-746
035-779
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
035-781 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the remote machine is busy.
035-792
035-793
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
062-956 The original size is not detected accurately. Check the originals placed on the
document glass, reload the originals, and then press the <Start> button.
Note • When using a non-standard size document, specify the original size in
[Original Size]. Depending on the selected document size, the printout
may be too large for the paper or may have shadows at the edges.
116-721
116-722
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
118-390 A device not supported by the machine is installed. Remove the device and
restart the machine.
Error Code Remedy
To Next Page
Loading...
