Fujitsu fi-8170

3 Press the [ ] button/[ ] button to select [1:Scanner Information], and then press the [Scan/Enter]
button.
The [Scanner Information] screen is displayed on the LCD.
4 Press the [
] button/[ ] button to select [1:Scanner], [2:Network], or [3:Server], and then press the
[Scan/Enter] button.
The selected item is displayed on the LCD.
5 Check the contents of the selected item.
You can check the settings for each item.
In this example, the indicator displays a scanner name because [1:Scanner ] is selected.
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
154