Fujitsu fi-8170

The Scanner Cannot Be Powered ON
Check the following points
● Is the power cable connected properly? (page 285)
● Did you press the [Power] button on the scanner? (page 285)
If the problem still persists, check each item in Before You Contact the Scanner Service Provider (page
330) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
● Is the power cable connected properly?
Solution
Connect the power cable properly.
For details, refer to Scanner Setup (page 40).
● Did you press the [Power] button on the scanner?
Solution
Press the [Power] button on the scanner.
For details, refer to How to Turn the Power ON (page 72).
Troubleshooting
285