Location and Frequency
Location Frequency
Inside of the scanner (ADF) Brake roller Every 5,000 sheets
Pick roller
Feed roller
Eject roller
Glass
Ultrasonic sensor
Document sensor
Inside of the scanner (Flatbed)
[fi-8290/fi-8270/fi-8250/
fi-8250U]
Document pad
Document bed
Plastic frame
The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of sheets scanned. The
scanner records the number of sheets scanned so that you can check the number of sheets scanned after you
cleaned it last.
● For fi-8190/fi-8290/fi-8170/fi-8270
Use one of the following methods to check the number of sheets that have been scanned.
- You can select [5: Consumable counters] from the [Settings Menu] screen on the operator panel to check
the number of sheets that have been scanned.
For details, refer to How to Use Settings Menu (page 146).
- You can check the number of sheets that have been scanned in the Software Operation Panel.
For details, refer to Checking the Sheet Counters (page 352).
● For fi-8150/fi-8250/fi-8150U/fi-8250U
You can check the number of sheets that have been scanned in the Software Operation Panel.
For details, refer to Checking the Sheet Counters (page 352).
ATTENTION
Cleaning cycles may vary depending on the condition of the documents. Also, cleaning must be performed
more frequently when the following types of documents are scanned:
● Smooth-faced documents such as coated paper
● Documents with printed text/graphics that almost cover the entire surface
● Chemically-treated documents such as carbonless paper
● Documents containing a large amount of calcium carbonate
● Documents written in lead pencil
● Documents on which the toner is not sufficiently fused
Daily Care
216
To Next Page
Loading...
Need help?
General
Weight and Dimensions
