Error Code Error Details (displayed in the Error Recovery Guide window)
H0 Motor circuit error
H1
H2
H8
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Imprinter System Error (When the Imprinter Is Installed) [fi-8190/fi-8170/
fi-8150/fi-8150U]
If a circuit error occurs in the imprinter, the following is displayed on the operator panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
H6:B1 H6:B1 Error
Imprinter system error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
● For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code Error Details (displayed in the Error Recovery Guide window)
H6 Imprinter system error
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Lamp Circuit Error
If a lamp circuit error occurs, the following is displayed on the operator panel.
● For the LCD
Troubleshooting
262
To Next Page
Loading...
Need help?
General
Weight and Dimensions
