Fujitsu fi-8170

the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Scanner Central Admin Server Setting Error [fi-8190/fi-8290/fi-8170/fi-8270/
fi-8150/fi-8250]
If an error occurs in the settings in the Scanner Central Admin Server, the following is displayed on the operator
panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
M4:AC M4:AC Error
Network error
Cannot register scanner details with Scanner Central Admin Server. Refer to
the Operator's Guide and take measures accordingly.
M5:A3 M5:A3 Error
Server error
Cannot connect to Scanner Central Admin Server. Refer to the Operator's
Guide and take measures accordingly.
M5:A4 M5:A4 Error
Server error
Cannot register scanner details with Scanner Central Admin Server. Refer to
the Operator's Guide and take measures accordingly.
M5:A5 M5:A5 Error
Server error
Maintenance work for Scanner Central Admin Server in progress. Refer to
the Operator's Guide and take measures accordingly.
● For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code Error Details (displayed in the Error Recovery Guide window)
n4 (*1) —
n5
*1:Displayed when the scanner details cannot be registered with Scanner Central Admin Server.
Take the following measures.
● Check the "Scanner Central Admin Server" setting on the scanner.
You can check the "Scanner Central Admin Server" setting as follows.
- For fi-8190/fi-8290/fi-8170/fi-8270
Troubleshooting
271