Specifying the Area to Detect Overlapped Documents [Document check area
specification for Multifeed Detection]
Specify an area to detect overlapped documents.
Specify this item when [Check Overlapping(Ultrasonic)] or [Check Overlapping and Length] is selected for
[Multifeed].
1 Start up the Software Operation Panel.
For details, refer to Starting Up the Software Operation Panel (page 333).
2 From the list on the left, select [Device Setting 2] → [Document check area specification for Multifeed
Detection].
3 Specify the detection range.
Select the [Selected range] check box.
Scanner Settings (Software Operation Panel)
380
To Next Page
Loading...
