Fujitsu fi-8170

Operational Settings for the Scanner
1 Press the [Power] button on the scanner.
The [Ready] screen is displayed on the LCD.
2 Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3 Press the [ ] button/[ ] button to select a setting item, and then press the [Scan/Enter] button.
For details about the setting items, refer to Configurable Items in the Settings Menu (page 161).
The screen with the selected item is displayed on the LCD.
4 Press the [
] button/[ ] button to select a parameter, and then press the [Scan/Enter] button.
For more details about the setting parameters, refer to Configurable Items in the Settings Menu (page 161).
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
155