Error Code Error Details (displayed in the Error Recovery Guide window)
F4 Background switching mechanism error (ADF Front)
Background switching mechanism error (ADF Back)
Open the ADF to check that there are no documents remaining, and then turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Motor Circuit Error
If a motor circuit error occurs, the following is displayed on the operator panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
H0:83 H0:83 Error
Motor circuit error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
H0:84 H0:84 Error
Motor circuit error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
H1:80 H1:80 Error
Motor circuit error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
H2:81 H2:81 Error
Motor circuit error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
H8:88 H8:88 Error
Motor circuit error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
● For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Troubleshooting
261
To Next Page
Loading...
