EasyManua.ls Logo

Fujitsu fi-8170

Fujitsu fi-8170
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code Error Details (displayed in the Error Recovery Guide window)
E6 Operator Panel error
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
EEPROM Error
If an EEPROM error occurs, the following is displayed on the operator panel.
For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
E7:D2 E7:D2 Error
EEPROM error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code Error Details (displayed in the Error Recovery Guide window)
E7 EEPROM error
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Image Memory Read-Write Error
If an error occurs when data is read from the image memory or written to the image memory, the following is
displayed on the operator panel.
For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Troubleshooting
259

Table of Contents

Other manuals for Fujitsu fi-8170

Related product manuals