EasyManuals Logo

Fujitsu fi-8170 User Manual

Fujitsu fi-8170
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Paper Jam (When the Imprinter Is Installed) [fi-8190/fi-8170/fi-8150/fi-8150U]
If a paper jam occurs in the imprinter, the following is displayed on the operator panel.
For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
J1:5A J1:5A Error
Paper jam
Remove the document.
For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code Error Details (displayed in the Error Recovery Guide window)
J1 Paper jam
Take the following measures.
When a paper jam occurs in the imprinter, refer to the fi-819PRB Imprinter Operator's Guide to remove
jammed documents.
Refer to the fi-819PRB Imprinter Operator's Guide to make sure that the document satisfies the requirements
for documents that can be fed into the imprinter
Refer to the fi-819PRB Imprinter Operator's Guide to clean the rollers.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner
Service Provider (page 330) and then contact the distributor/dealer where you purchased this product. Refer to
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Multifeed
If a multifeed occurs, the following is displayed on the operator panel.
For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code Error Details and the Solution
J2:55 J2:55 Error
Multifeed detected (Overlap)
Press the [Scan/Enter] button. If there is a document that is being fed, it
will be ejected.
Troubleshooting
265

Table of Contents

Other manuals for Fujitsu fi-8170

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu fi-8170 and is the answer not in the manual?

Fujitsu fi-8170 Specifications

General IconGeneral
Duplex scanningYes
Maximum scan size216 x 355.6 mm
ADF scan speed (b/w, A4)70 ppm
Optical scanning resolution600 x 600 DPI
Black/white scanning color modesGrayscale, Monochrome
Control typeButtons
Scanner typeADF + Manual feed scanner
Product colorBlack, Grey
Sensor typeDual CIS
Scan driversISIS, TWAIN
Scan file formatsJPEG, PDF, PNG, TIFF
Daily duty cycle (max)- pages
Scanner smart software featuresBlank page detection
Auto document feeder (ADF) input capacity100 sheets
Card thickness (max)1.4 mm
Paper tray media weight20 - 465 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
USB version3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)0.2 W
Power consumption (typical)28 W
Sustainability certificatesENERGY STAR, RoHS
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth163 mm
Width170 mm
Height300 mm
Weight4000 g

Related product manuals