Fujitsu fi-8170 User Manual

2 Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3 Press the [ ]/[ ] button to select [5: Consumable counters], and then press the [Scan/Enter] button.
The [Consumable counters] screen is displayed on the LCD.
4 Press the [ ]/[ ] button and check the counter.
Counters are highlighted when consumable replacement or cleaning is required.
Counters will appear highlighted when:
● The page count after the consumable is replaced reaches 95% of the value configured in Specifying the
Cycle to Replace Consumables [Life Counter Alarm Setting] (page 358) in the Software Operation Panel.
(For the brake roller/pick roller counters)
● The page count after cleaning reaches the value configured in Scanner Cleaning Cycle [Cleaning Cycle]
(page 357) in the Software Operation Panel. (For the cleaning counter)
● The amount of remaining ink is below 33%. This is only displayed when the imprinter is installed. (For the
ink counter)
HINT
The total number of sheets scanned is displayed in total count. Total count cannot be cleared.
5 After replacing the consumables or cleaning, press the [ ]/[ ] button to select the highlighted
counter, and then press the [Scan/Enter] button.
A message appears to confirm that you want to clear the counter.
6 Press the [
] button/[ ] button to select [1: Yes], and then press the [Scan/Enter] button.
The counter is reset to 0.
For remaining ink, it is reset to 100.
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
158

Fujitsu fi-8170 Specifications

General

Duplex scanning	Yes
Maximum scan size	216 x 355.6 mm
ADF scan speed (b/w, A4)	70 ppm
Optical scanning resolution	600 x 600 DPI
Black/white scanning color modes	Grayscale, Monochrome
Control type	Buttons
Scanner type	ADF + Manual feed scanner
Product color	Black, Grey
Sensor type	Dual CIS
Scan drivers	ISIS, TWAIN
Scan file formats	JPEG, PDF, PNG, TIFF
Daily duty cycle (max)	- pages
Scanner smart software features	Blank page detection
Auto document feeder (ADF) input capacity	100 sheets
Card thickness (max)	1.4 mm
Paper tray media weight	20 - 465 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
USB version	3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	28 W
Sustainability certificates	ENERGY STAR, RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	163 mm
Width	170 mm
Height	300 mm
Weight	4000 g