Indication Description
n When this error appears, turn the power off then back on.
If the problem still persists, write down the error code, check each item in Before You
Contact the Scanner Service Provider (page 330) and then contact the distributor/dealer
where you purchased this product. Refer to the contact information in the Contact List if
supplied with this product, or refer to the contact information in the Contact for Inquiries
section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
None If the scanner is not operated for the length of time that is set for the sleep interval, it
enters power saving mode.
Press any button on the scanner (except the [Power] button) to resume from power saving
mode.
How to Use the Operator Panel [fi-8150/fi-8250/fi-8150U/fi-8250U]
175