Fujitsu fi-8170

3 Check each counter.
Total Count (ADF)
Total number of sheets scanned using the ADF (in 1 sheet increments)
Total Count (FB) [fi-8290/fi-8270/fi-8250/fi-8250U]
Total number of sheets scanned using the flatbed [fi-8290/fi-8270/fi-8250/fi-8250U] (in 1 sheet
increments)
After cleaning
Total number of sheets scanned after the last cleaning (in 1 sheet increments)
Brake Roller
Approximate number of sheets scanned since the last replacement of brake roller (in units of 500)
Pick Roller
Approximate number of sheets scanned since the last replacement of pick rollers (in units of 500)
Remaining Ink
Amount of ink remaining in the print cartridge of the imprinter (only displayed when the imprinter is
installed)
The factory default setting for each counter is "0".
The factory default setting for the [Remaining Ink] counter is displayed only when the imprinter is installed.
Scanner Settings (Software Operation Panel)
353