Disabling the TPM in the system board BIOS
Proceed as follows:
▶
Switch on or restart your server
.
▶
As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶
Select the Advanced menu.
▶
Select the Trusted Computing submenu.
▶
Set the TPM Support and TPM State settings to Disabled.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
Removing the TPM
▶
Lay the bottom system board on a soft, antistatic surface with its component
side facing down.
Figure 181: Removing the TPM screw
System board and components
322 Upgrade and Maintenance Manual RX4770 M5
To Next Page
Loading...
