Fujitsu PRIMERGY RX4770 M5 User Manual

▶
Remove all riser modules and the RAID card, see "Expansion cards and
riser cards" on page
190.
▶
Remove the air duct from the system board, see "Removing the CPU air
duct" on page 72.
▶
"Removing the fan cage" on page 69.
▶
If applicable, remove the OCP module, see "Removing the OCP module"
on page 186.
▶
"Removing the top system board holder" on page 74.
▶
"Removing the defective bottom system board" on page 362.
▶
Remove the air duct from the bottom system board, see "Removing the
CPU air duct" on page 72.
Removing BitLocker protection and decrypting the volume
▶
Before removing the TPM board, it is necessary to remove BitLocker
protection from the computer and to decrypt the volume. Ask the system
administrator to turn off BitLocker protection using the BitLocker setup
wizard available either from the Control Panel or Windows Explorer:
▶
Open Bitlocker Drive Encryption by clicking the Start button, clicking
Control Panel, clicking Security, and then clicking Bitlocker Drive
Encryption.
Administrator permission required: If you are prompted for an
administrator password or confirmation, type the password or
provide confirmation.
▶
T
o turn off BitLocker and decrypt the volume, click Turn Off BitLocker,
and then click Decrypt the volume.
Decrypting the volume may be time-consuming. By decrypting the
volume, all of the information stored on that computer is decrypted.
For more information on how to disable BitLocker drive encryption,
see the Microsoft Knowledge Base. See the Fujitsu web pages for
more details.
System board and components
RX4770 M5 Upgrade and Maintenance Manual 321

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English