▶
"Switching on the server" on page
59.
For CPU3 and CPU4 (top system board)
▶
"Installing the CPU air duct" on page 74.
▶
"Reassembling" on page 53.
▶
"Switching on the server" on page 59.
Further concluding steps for both installation steps
▶
"Connecting the power cord (AC PSU)" on page 58.
▶
"Switching on the server" on page 59.
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
●
Restart your server
.
●
As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
●
If a password is assigned, enter the password and press [Enter].
●
Select the Save & Exit menu.
●
Select Save Changes and Exit or Save Changes and Reset.
●
Verify that the Global Error indicator stops flashing.
▶
"Resetting the error status after replacing memory modules or CPU" on
page
97.
▶
"Enabling replaced components in the BIOS" on page 102.
▶
"Resuming BitLocker functionality" on page 108.
Liquid cooling (LC)
394 Upgrade and Maintenance Manual RX4770 M5
To Next Page
Loading...
Need help?
General