Funkwerk W1002 - Page 104

Fields in the Date and Time Manual Time Settings menu
Field Description
New Date Enter a new date.
Format:
• Day: dd
• Month: mm
• Year: yyyy
New Time Enter a new time.
Format:
• Hour: hh
• Minute: mm
Fields in the Date and Time Automatic Time Settings (network time protocol) menu
Field Description
Primary Time Server Enter the first time server, by using either a domain name or an
IP address.
Also select the protocol for the time server query.
Possible values:
• SNTP (default value): This server uses the simple network
time protocol with UDP port 123.
• Time Service / UDP: This server uses the Time service
with UDP port 37.
• Time Service / TCP: This server uses the Time service
with TCP port 37.
• None: This time server is not currently used for the time
query.
Secondary Time Server Enter the second time server, by using either a domain name or
an IP address.
Also select the protocol for the time server query.
Possible values:
• SNTP (default value): This server uses the simple network
8 System management Funkwerk Enterprise Communications GmbH
92 bintec W1002/W1002n/W2002/WIx040/WIx065