Field Description
For Operation Mode = Access Client
Possible values:
• 2.4 and 5 GHz(default value)
• 5 GHz
• 2.4 GHz
Usage Area Only for Operation Mode = Access Client, Client Mode =
Infrastructure and Operation Band = 2.4 and 5 GHz, 5
and 2.4 GHz or 5 GHz
Possible values:
• Indoor-Outdoor (default value)
• Indoor
• Outdoor
IEEE 802.11d Compli-
ance
Only for Operating Mode = Access Client
Possible values:
• Flexible (default value)
• None
• Strict
Channel The number of channels you can selected depends on the
country setting. Please consult the data sheet for your device.
Access Point mode:
Configuring the network name (SSID) in Access Point mode
means that wireless networks can be logically separated from
each other, but they can still physically interfere with each other
if they are operating on the same or closely adjacent wireless
channels. So if you are operating two or more radio networks
close to each other, it is advisable to allocate the networks to
different channels. Each of these should be spaced at least four
channels apart, as a network also partially occupies the adja-
cent channels.
In the case of manual channel selection, please make sure first
that the clients actually support these channels.
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 141
To Next Page
Loading...
