Field Description
• Access Client: Your device serves as an Access Client in
your network.
• Bridge: Your device is used as a wireless bridge in your net-
work.
Client mode
Only for Operating Mode = Access Client
Possible values:
• Infrastructure (default value): In a network in infrastruc-
ture mode, all clients communicate with each other via access
points only. There is no direct communication between the in-
dividual clients.
• Ad-Hoc: In ad-hoc mode, an access client can be used as
central interface between a number of terminals. In this way,
devices such as computers and printers can be wirelessly in-
terconnected.
Select the channel to be used.
Operation Band Select the operation band and usage area of the wireless mod-
ule.
For Operation Mode = Access Point or Bridge
Possible values:
• 2.4 GHz In/Outdoor (default value): our device is oper-
ated at 2.4 GHz (mode 802.11b and mode 802.11g), inside or
outside buildings.
• 5 GHz Indoor: Your device is run with 5 GHz (Mode
802.11a/h) inside buildings.
• 5 GHz Outdoor: Your device is run with 5 GHz (Mode
802.11a/h) outside buildings.
• 5 GHz In/Outdoor: Your device is run with 5 GHz (Mode
802.11a/h) inside or outside buildings.
• 5.8 GHz Outdoor: Only for so-called Broadband Fixed Wire-
less Access (BFWA) applications. The frequencies in the fre-
quency range from 5,755 MHz to 5,875 MHz may only be
used in conjunction with commercial offers for public network
accesses and requires registration with the Federal Network
Agency.
11 Wireless LAN Funkwerk Enterprise Communications GmbH
140 bintec W1002/W1002n/W2002/WIx040/WIx065