Field Description
• Frame Compression: If this function is activated, sent data
is compressed. This only works in combination with clients
that use Conexant radio cards. The gain in transmission
speed depends to a large extent on the type of transmitted
data.
• Frame Concatenation: If this function is activated, several
small data packets are combined to form larger ones. This
only works in combination with clients that use Conexant radio
cards.
• Piggyback Acknowledge: If this function is activated, the
confirmation for received packets ("ACK") is combined with
other sent packages. This only works in combination with cli-
ents that use Conexant radio cards.
• Direct Link: If "Direct link" is activated, logged-on clients
can exchange data directly, without routing via the access
point. This only works in combination with clients that use
Conexant radio cards.
By default, Frame Concatenation, Piggyback Acknow-
ledge and Direct Link are activated.
Burst Mode Only for bintec W1002n
Activate this function to increase the transmission speed for
802.11g through frame bursting. As a result, several packets
are sent one after the other without a waiting period. This is par-
ticularly effective in 11b/g mixed operation.
The function is activated with Enabled.
The function is activated by default.
If problems occur with older WLAN hardware, this function
should be deactivated.
The Advanced Settingsmenu consists of the following fields:
Fields in the menu Advanced Settings
Field Description
Beacon Period Only for Operation Mode = Access Point.
Enter the time in milliseconds between the sending of two
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 147