Field Description
Select one of the keys configured in WEP Key <1 - 4> as the
default key.
The default value is Key 1.
WEP Key 1-4 Only if Security Mode = WEP 40 , WEP 104
Enter the WEP key.
Enter a character string with the right number of characters for
the selected WEP mode. For WEP 40 you need a string of 5
characters, WEP 104 13 characters. For example hello for
WEP 40, funkwerk-wep1 for WEP 104.
WPA Mode Only if Security Mode = WPA-PSK and WPA-Enterprise
Select whether you want to use WPA (with TKIP encryption) or
WPA 2 (with AES encryption), or both.
Possible values:
• WPA and WPA 2 (default value): WPA and WPA 2 can be
used.
• WPA : Only WPA is used.
• WPA 2 : Only WPA2 is used.
WPA Cipher
Only for Security Mode = WPA-PSK and WPA Mode = WPA or
WPA and WPA2
Select which encryption method should be used.
Possible values:
• TKIP (default value): Temporal Key Integrity Protocol.
• AES: Advanced Encryption Standard.
• AES and TKIP
Both encryption methods are rated as secure, with AES offering
better performance.
WPA2 Cipher
Only if Security Mode = WPA-PSK
and WPA Mode = WPA2 or WPA and WPA2
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 159
To Next Page
Loading...
Need help?
General
