Field Description
Transmit Key Only if Security Mode = WEP 40, WEP 104
Select one of the keys configured in WEP Key <1 - 4> as the
default key.
The default value is Key 1.
WEP Key 1-4 Only if Security Mode = WEP 40 , WEP 104
Enter the WEP key.
Enter a character string with the right number of characters for
the selected WEP mode. For WEP 40 you need a string of 5
characters, WEP 104 13 characters. For example hello for
WEP 40, funkwerk-wep1 for WEP 104.
WPA Mode Only if Security Mode = WPA-PSK and WPA-Enterprise
Select whether you want to use WPA (with TKIP encryption) or
WPA 2 (with AES encryption), or both.
Possible values:
• WPA (default value): Only WPA is used.
• WPA 2 : Only WPA2 is used.
Preshared Key Only if Security Mode = WPA-PSK
Enter the WPA password.
Enter an ASCII string with 8 - 64 characters.
WPA Cipher
Only for Security Mode = WPA-PSK and WPA Mode = WPA
Select which encryption method should be used.
Possible values:
• TKIP (default value): Temporal Key Integrity Protocol.
• AES: Advanced Encryption Standard.
• AES and TKIP
Both encryption methods are rated as secure, with AES offering
better performance.
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 165
To Next Page
Loading...
Need help?
General
