Field Description
WPA2 Cipher
Only for Security Mode = WPA-PSK and WPA Mode = WPA2
Select which encryption method should be used.
Possible values:
• TKIP (default value): Temporal Key Integrity Protocol.
• AES: Advanced Encryption Standard.
Both encryption methods are rated as secure, with AES offering
better performance.
11.1.4.2 Client Link Scan
After the desired Client Links have been configured, the icon is shown in the list.
You use this icon to open the Scan menu.
Fig. 69: Wireless LAN->WLANx->Client Link->Scan
After successful scanning, a selection of potential scan partners is displayed in the scan
list. In the Action column, click [Select] to connect the local clients with this client. If the
partners are connected with one another, the icon appears in the Connected column.
The icon appears in the Connected column if the connection is active.
The Wireless LAN ->WLANx-> Client Link -> Scan menu consists of the following fields:
Fields in the Client Link Scan menu
11 Wireless LAN Funkwerk Enterprise Communications GmbH
166 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
