Field Description
Authentication Select the authentication protocol for this Internet connection.
Select the authentication specified by your provider.
Possible values:
• PAP (default value) Only run PAP (PPP Password Authentica-
tion Protocol); the password is transferred unencrypted.
• CHAP: Only run CHAP (PPP Challenge Handshake Authentic-
ation Protocol as per RFC 1994); the password is transferred
encrypted.
• PAP/CHAP: Primarily run CHAP, otherwise PAP.
• MS-CHAPv1: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
• PAP/CHAP/MS-CHAP : Run primarily CHAP, if denied then
the authentication protocol required by the PPTP partner
(MSCHAP version 1 or 2 possible).
• MS-CHAPv2: Run MS-CHAP version 2 only.
DNS Negotiation Select whether your device receives IP addresses for primary
DNS server and secondary DNS server from the connection
partner or sends these to the connection partner.
The function is activated with Enabled.
The function is enabled by default.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is activated with Enabled.
The function is disabled by default.
PPTP Address Mode Displays the address mode. The value cannot be changed.
Possible values:
• Static: The IP address of the Ethernet port selected in
PPTP Interface will be used.
Local PPTP IP Address Assign the PPTP interface an IP address that is used as the
source address.
Funkwerk Enterprise Communications GmbH
13 WAN
bintec W1002/W1002n/W2002/WIx040/WIx065 219
To Next Page
Loading...
Need help?
General
