FUTABA T10J - Flap Trim

112
Airplane
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
This function trims the CH6 VR knob.
●The trim travel can be adjusted.
*When the aperon function is activated ( “ACT” ), this function is turned on automatically. It can be
turned on and o󱐯 independently.
"FLAP TRIM"
FLAP TRIM
Flap trim
(ACROBATIC)
Activating the function
Flap trim rate
● When INH is selected, the
function cannot be used. To use
the function, select ACT.
● Select the setting item with
the Jog key.
■ Activating the function
① Select the "MIX" item and then
select the "ACT" by pressing
the + key or – key.
＋ －
or
● When you do not use a
function, set to the "INH" side.
■ Flap rate
＋ －
or
② Select the "RATE" item and then adjust
the ap rate by pressing the + key or –
key.
Range：-100 ～ +100%
Default：0%
● When you want to return the set value to the initial value, press
the + key and – key simultaneously.
Flap Trim
FLAP TRIM